23
E) Installation instructions
Repairing the wheel bearings
Changing the wheel bearing grease
As the operations are identical for both procedures, the descriptions
are contained in the same chapter.
After 500,000 km or after 60 months’ operation, the following
2 procedures are possible:
1)
Inspection of the wheel bearing for further serviceability with
grease change and replacement of the seal rings.
2)
Replacement of the complete wheel bearing assembly with seals
and long-life grease. The wheel hub can continue to be used.
The wheel bearing has to be disassembled for the inspections;
replace any parts which are worn or damaged.
The wheel bearings must be in a good and serviceable condition.
The outer races must still have a correct, secure seating in the wheel
hub.
The wheel bearing must turn freely without noises.
During assembly of the wheel bearing set, ensure absolute cleanliness
of all the parts as even the slightest dirt can significantly reduce the
service life of the wheel bearings.
Note:
Replacement of only one bearing is not permitted.
Always change the wheel bearings in pairs with the complete seal
set and the prescribed grease packing.
Adjust the wheel bearing clearance – see chapter “Maintenance”.
Wheel bearing kit
Original compact hub
Arrangement of wheel bearing
assembly with seals
