SAF SBS 1918 H0 Скачать руководство пользователя

Страница: 6 / 42

2 Safety precautions

XL-SA30000RM-en-DE Rev A • 02.2016 • Errors and changes excluded © SAF-HOLLAND

1.2 Functional description

The SAF SBS2220 H0 comprises a monobloc

floating calliper (item C) and an integrated adjust

ment unit, which compensates for the brake pad wear.

Fig. 2 -

Functional description

The unit, which is actuated by the lever mechanism

(item A), presses the inner brake pad (item B) against

the disc, which then causes the brake calliper (item C)

to slide laterally. In so doing, the outer brake pad

(item D) comes into contact with the disc.

Fig. 3 -

Guide pin and spring brake chamber

The brake calliper moves on the guide pins (item E)

(see If the disc brake also serves as a parking brake,

the unit is actuated with the aid of a spring brake

chamber (item F).

2 Safety precautions

2.1 General information

This chapter details the safety precautions that must

be read and followed before any inspection/repair/in-

stallation procedure described in these repair instruc-

tions is started. These repair instructions are intended

for the exclusive use of trained persons within the

commercial vehicle industry and related workshops.
Three different alert levels are used throughout these

repair instructions:

●

Danger

●

Caution

●

Note

The following symbols are used to denote particularly

important information and sections of the text. En-

sure that they are always read and adhered to before

working with the product.

Danger!

This safety instruction with the signal word warns of

a possible safety risk or serious and fatal injury!

Caution!

This safety instruction with the signal word warns of

possible damage to the product!

Note:

Marking for special user tips and other particularly

useful and important information for efficient work

and economical use.

Содержание SBS 1918 H0











































Результаты поиска

Содержание SBS 1918 H0

Отзывы:

Похожие инструкции для SBS 1918 H0

Бренды по названию

Популярные бренды

SAF SBS 1918 H0, Инструкции по ремонту

Результаты поиска

Содержание SBS 1918 H0

Отзывы:

Похожие инструкции для SBS 1918 H0

Бренды по названию

Популярные бренды