SAF-HOLLAND SK RB 9022 H, Руководство по обслуживанию и ремонту

Страница: 3 / 34

SAF axle identification 2
Notes 4/33-34
Repairing the brakes 14-20
Replacing the tappets with tappet boots 21
Installing the tappets with tappet boots 22
Replacing the guide pin/slides 22-24
Installing the guide pin/slides 24-26
Replacing the brake cylinder 26
Replacing the tensioning unit 27
Installing the new tensioning unit 27-28
Synchronising the adjustment screws of the tensioning unit 29
Overview of hub unit components 30
D) Installation instructions
B) Maintenance instructions
Maintenance instructions for SAF axles
SK RB 9022 H - SK 1000 ET 120
6
Maintenance schedule for SAF axles
SK RB 9022 H - SK 1000 ET 120
7
Brake testing (fault-finding procedure) 8
Adjuster check 9
Brake pad check 10
Special notes 11
3
Contents
Page
This manual is intended for the technical workshop personnel responsible for maintenan-
ce and repair.
A) General safety instructions 5
E) Service tools 31
F) Bolt / Nut torque values 32
The item numbers indicated are given only for identification and to distinguish between different versions.
Use the part numbers from the valid spare parts documents for identification of spare parts.
SAF axles and suspension units are subject to continuous further development; the data and drawings
contained in the manual may therefore differ from the details given in the operating permit.
The contents of the manual does not constitute the basis for a legal claim.
Reprinting, reproduction or translation in whole or in part is not permitted.
The issue of this publication invalidates all earlier maintenance and repair manuals.
Note: We wish to thank HALDEX for providing various illustrations!
Spare part illustration and spare part designation
SK RB 9022 H - SK 1000 ET 120
12-13
C) Spare part illustrations/spare part designation