6
XL-AS20016BM-en-US Rev A · 2015-05-28 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Model Identification
Figure 9
Figure 8
3. CBX Slider Suspension with
Auto-PosiLift
™
Model Identification
The CBX slider suspension serial tag is located on the rear
crossmember
(Figure 8)
.
NOTE:
Refer to the serial number tag attached to the slider
rear crossmember for information
(Figure 8)
.
NOTE:
If the suspension serial tag is not legible or is not
available, the suspension model can be identified
by the appearance of the PosiLift
™
bracket on the
front axle
(Figure 8)
.
NOTE:
This manual applies to the suspension models
listed on the front cover. When the specific model
number is determined, it is strongly recommended
that the information is written below and referred
to when obtaining information or replacement
parts
(Figure 9)
.
The sample tag illustrated will help you interpret the
information on the SAF-HOLLAND
®
, Inc. serial number tag.
The part number is on the first line. The model number along
with the suspension capacity are on the second line. The third
line contains the serial number
(Figure 9)
.
TAG LOCATED ON
REAR CROSSMEMBER
CB X 40 - 48 16
CB Slider
Axle Capacity
40 - 40,000 lbs.
69 - 69,000 lbs.
5.75" Diameter Premium Axle
Slider Box Width
42" (1067 mm) Wide
48" (1219 mm) Wide
54" (1372 mm) Wide
Ride Height
15.5" (393 mm)
16" (406 mm)
16.5" (419 mm)
17" (432 mm)
18" (445 mm)
