Saf-Fro PRESTO 300MV, Инструкция по эксплуатации, безопасности и обслуживанию

Страница: 5 / 94

EN-5
EN
2 - TECHNICAL DATA – DATA PLATE
PRESTO 300MV FLEX LINE
Power supply 230 V AC – 1 ph – 50/60 Hz
/[\#'?]@#'
230 V AC – 3 ph – 50/60 Hz
/[\#'?]@#'
400 V AC – 3 ph – 50/60 Hz
&=\#'==\#'
Welding process TIG MMA TIG MMA TIG MMA
Power supply at: ED 60%
ED 100% 3,3 kVA 4,5 kVA
2,5 kVA 3,4 kVA 5,5k VA 6,2 kVA
4,1 kVA 4,6 kVA 5,8 kVA 8,3 kVA
4,0 kVA 6,5 kVA
Primary consumption at I
2
max.
Q
23,5 A 27,0 A
16 A
19,3 A 21 A
13 A
11,4 A 16,5 A
10 A
Open circuit voltage /=#[/@#/=##$% /=#[/@#/=##$% /=#[/@#/=##$%
Welding current 5 – 215A 5 – 180A 5 – 270A 5 – 215A 5 – 270A 5 – 270A
Duty cycle at 35%
/\!=\_ at 60%
at 100% ?/@'&\`/[\'
150 A 135 A
120 A 105 A ?j\'=\`?/@'=\`
215 A 175 A
170 A 135 A
270 A 270 A
205 A 205 A
160 A 160 A
Electrode diameters ((' 1,6 to 4,0 mm 1,6 to 5,0 mm 1,6 to 6,3 mm
Weldable electrodes E6010 - E6011 – E6013 – E7018
Protection / insulation class IP22S / H
VRD function ")*{|}XXXX(('{|}|$!/?X]!/
TIG LIFT start ON
Q")* 1,0 to 2,4 mm 1,0 to 2,4 mm 1,0 to 3,2 mm
%~>>€~ 220 x 394 x 534 mm / 22 kg
Standards EN 60974-1; EN 60974-10
" < <!
NOTE: THIS POWER SOURCE CANNOT BE USED IN FALLING RAIN OR SNOW. IT MAY BE STORED OUTSIDE, BUT IT IS NOT DESIGNED FOR
USE WITHOUT PROTECTION DURING PRECIPITATION.
Code letter IP Degrees of protection
First digit 2 '< ‚ƒ/?@
Second digit 1 '
2 '/@_
3 ']\_
S ) <
was carried out with all parts of the equipment at idle.
IMPORTANT: MAKE SURE THE POWER SOURCE MEETS THE ABOVE REQUISITES. EXCEEDING THE SPECIFIED VOLTAGES CAN DAMAGE THE
WELDING MACHINE AND INVALIDATE THE WARRANTY.
2.1 - ACCESSORIES
Consult the area agents or the dealer.
2.2 - DUTY CYCLE AND OVERHEATING
% /\=\_<
that the unit can weld at its rated output without overheating. If the unit
overheats, the output stops and the over temperature light comes ON. To
correct the situation, wait the unit to cool. Reduce amperage, voltage or duty
cycle before starting to weld again.
TECHNICAL DATA – DATA PLATE