11
When using the distiller for the first time, discard the first cycle of distilled water, so that
the internal components are completely sterilized by this first cycle.
- Avoid connecting the apparatus without water in the camera.
- After a complete distillation cycle, do not open the condensation cover immediately.
Wait for the cover cools down for at least 20 minutes.
Activated coal filter installation
*
E - The distiller will automatically turn on in the first use, when this
does not occur use the power button switch "SPSP".
The time to produce 4 liters of distilled water is approximately 4 hours.
The distiller will automatically turn off when all the water is evaporated
from the chamber.
A - Remove the nozzle guide located in the condensation cover;
B - Prepare the activated coal filter to replace the nozzle guide, put 2 to 3 glass of water in the filter
before each cycle of distillation. After the filter is dampened fit it in the condensation cover (C1).
Only will be necessary to use the activated coal filter if water is indicated for human consumption.
E
A
B
c1
*
Optional item
EQUIPMENT OPERATION
