SAESHIN Traus SIP10, Инструкция по эксплуатации

Страница: 12 / 25

1. Motor Connection
: Please insert the motor plug to the device correctly. (Place the arrow mark on top. See the picture below.)
- Make sure the power is off before connect each part.
(Otherwise, it might cause a malfunction.)
CONNECTION OF EACH PART
1
3 2
4
2. Foot Controller Connection
: Please insert the foot controller connector. Check the hole and pins of
foot controller connector are in place. Then screw the Connector Lock.
3. Power Cord Connection
: Insert the power cord into the main power inlet of the control box.
20
( O ) ( X )
Connector Lock