15
OPERATION PROCESS
1. Put up the handpiece and turn on the control box.
(When the power is turned on, the beep sound is ring and the RPM is displayed on the indicator.)
2. Select the operation method by pressing the Hand
/
Foot Select Button.
When the left light is on, hand is selected, when the right light is on, foot is selected.
3. Select the rotation direction by pressing the Rotation Direction Select Button.
When the left light is on, the forward direction is selected, when the right light is on, the reverse direction is selected.
■
Maximum Speed Change Function
(
FORTE 100
α,
FORTE 100
α
D Only)
It is function to change the maximum speed from 40,000 rpm to 50,000 rpm.After setting the speed control dial
at ‘0’, Press the Hand
/
Foot Select Button and Motor Button. Maximum speed is enlarged to50,000 rpm.
Re-press the two buttons, Maximum speed is returned.
■
Handpiece Auto Calibration Function
It is function to calibrate matching the RPM of handpiece and control box automatically.Turn on the power with
holding the motor button. After the ‘CAL’ is displayed at the indicator,forward calibration is performed as speed
is increased from 0 to maximum. Press the Rotation Direction Select Button,Reverse Calibration is performed.
Function is completed, press the motor button.
■
How to use when select the hand
4. Push the motor button.
5. Control the desired speed by turning the speed control dial.
6. Handpiece is stopped by re-pressing the motor button.
■
How to use when select the foot
4. Control the desired speed by turning the speed
control dial.
5. Operate the handpiece by controlling the foot controller.
(Handpiece is worked within setting range.)
6. Foot controller is released, handpiece is stopped.
- The first characters shown on the indicator when the power is turned on are software versions.
- If operate above function, limit value is set 40,000 rpm. But if function is not activated,
limit value is not accurate.
- The function is set up when the product is released by manufacturer.
Use the function when user repair or change the product.
■
Auto Cruise Function
(
FORTE 100 Only)
It is function to fix the speed of handpiece when operation by handpiece.
Hold the foot controller as pressing for
3~
5 seconds, the beep sound is ring.
After that, the speed is kept even when releasing thefoot controller.
To release the function, press the foot controller again.
■
Overload Protective Function
If handpiece is overloaded, after about 5 seconds, beep sound is ring and the error cord ‘E1’ is displayed at the
indicator andhandpiece is stopped.Hand
/
Foot Select Button is selected as the hand, this function can be disabled
by pressing the motor button.Re-press the motor button, handpiece can be used.Hand
/
Foot Select Button is
selected as the foot, this function can be disabled by releasing the foot controller.Re-press the foot controller,
handpiece can be used.
Содержание FORTE 100
