SAelen TS GS/TIGER 25D, Техническое руководство

Страница: 19 / 60

A. The frame
The frame of the chipper supports the different parts of the TIGER. It allows the autonomous transportation of
the machine.
Rotor:
The rotor is the main part of the machine that crushes the material that is fed by the feed
roll. It rotates by accelerating the engine and rotates continuously .
B. The chipping cell
The chipping cell consists of a hopper (1) , a metal
belt (2) , a feed roll (3) with notched rods and a rotor
that crushes the material.
Feed belt and roll:
They transport material to the rotor at a constant
speed. A blocking system stops them when the rotor
speed is too low (blockage during chipping) and they
start automatically when the rotor has reached a
sufficient speed again.
They can be operated in both directions (forward
and backward) using the yellow and black buttons at
the back of the hopper.
The rotation speed can be set using the wheel (4) in
the cover at the back left according to the diameter
of the material.
General description and operations