Saeco Xsmall Plus, Руководство по обслуживанию, Страница: 25 / 42

page 2 / 2 Rev. 00 / Jul. 2008 Saeco Int.
05 TEST MODE XSMALL
lev. pos. selector LED key function notes
L1
ON
brewing unit
microswitch
Gear motor rises (brewing
unit in work position)
ON
brewing unit
microswitch
Gear motor falls (brewing
unit in home position)
OFF
power con-
sumption of
the unit in mA
OK
Blinks
Between 200 and 300 mA
OK with unit inserted
ON
KO
over 300 mA
PRESS THE ON/OFF KEY TO ACCESS THE NEXT LEVEL UP
L2
Blinks
pump opera-
tion
Make water come out of
the steam hose
turbine opera-
tion
Each blink corresponds to
one turbine rotation
coffee pipe
operation
Return to L1 and switch
the unit to Work, return to
L2 and make water come
out of the dispenser
PRESS THE ON/OFF KEY TO ACCESS THE NEXT LEVEL UP
L3 power con-
sumption of
the boiler
Use an ammeter to check
the power consumption is
between 5.3 and 6.1 mA
Blinks
coffee grinder
operation
coffee grinder
sensor
Each blink corresponds to
one coffee grinder rotation
Operational check -
brewing unit
Operational check - pump and turbine
Operational check - boiler/coffee grinder
5.2. Draining the boiler (Steam Out)
To drain the boiler, proceed as follows:
MACHINE UNPLUGGED
- Turn the selector to the water position , press and hold the large coffee key and plug the
machine in.
- The three LEDs light up and remain lit.
- Release the large coffee key; the LEDs will begin to blink in an anti-clockwise cycle and boiler
draining will commence (remember to place a recipient underneath the steam hose).
- When the draining process is complete, the double coffee and temperature LEDs will remain lit.
- Unplug the machine to end this procedure.
- Press on/off; the coffee maker will begin fi lling the circuit (red LED 3 blinks quickly).