Saeco Xsmall Plus, Руководство по обслуживанию, Страница: 10 / 42

Saeco Int. Rev. 00 / Jul. 2008 Page 1 / 4
XSMALL 02 TECHNICAL SPECIFICATIONS
2.1. Technical specifi cations
2.2. Machine parameters and performance
Power supply and output: 230 V~ 50/60 Hz 1500 W - 120 V~ 60 Hz 1500 W - 100 V~
50/60 Hz 1300 W
Temperature monitoring: Variable resistor sensor (NTC) - transmits the value to the
electronic P.C.B.
Safety system: 2 manual reset or one-shot thermostats (175°C)
Coffee heat exchanger output:
Stainless steel
(230/120 V~) 1300 W - (100 V~) 1100 W
for coffee, hot water and steam dispensing
Gear motor: 33VC with 2 rotation directions; power supply 24VC
Pump: Ulka with reciprocating piston and 100°C cutout 48 W, 230 V, 50
Hz, Type EP5 approx. 13-15 bar 120 V, 60 Hz 100 V, 50/60 Hz
Overpressure valve: Opens at approx. 16-18 bar
Water fi lter: In tank
Coffee grinder: Direct current motor with fl at ceramic grinders
Hot water/steam valve Presblock
Automatic dosage Dose adjustment controlled by the electronic system
Power consumption: During the heating phase - approx. 5.6 A
Dimensions: W x H x D in mm: 295x325x420
Weight: 6.9 kg
Water tank capacity: 1.0 litres
Coffee container capacity 185 g coffee beans
Coffee dreg drawer capacity 08
Heat exchanger capacity: Approx. 10 cc
Water circuit fi lling time: Approx. 15 seconds for fi rst fi lling cycle
Heating time: Approx. 45 seconds
Dispensing temperature: Approx. 84 ± 4°C
Grinding time: Approx. 8-10 seconds
AMOUNT
OF PRODUCT
Minimum
amount
(Puls.)
Default
amount
(Puls.)
Maximum
amount
(Puls.)
Programm. by
the user
Programm. by
Production/Serv-
ice department
Espresso 70 165 600 Yes No
Medium coffee No No No No No
Large coffee 70 440 600 Yes No
Pre-ground No
Hot water
Continues until the water supply has been exhausted ( fi ll circuit
status)
Steam for frother
Continues until the water supply has been exhausted ( fi ll circuit
status)
Steam for Milk-
Island
No