Saeco Tchibo Cafissimo Series HD8603, Руководство по эксплуатации

Страница: 38 / 216

• 28 •
20- Fit the milk dispensing spout back into its
housing. You should hear and feel it click
into place.
14- Remove the lower part of the dispensing
spout.
15- Wash all the components with luke-
warm running water. The internal parts
of the frothing system are dishwasher
safe. When all components have been
washed, reassemble them following the
same procedure, but in reverse order.
Assembly procedures of the milk jug:
16-
Connect the bottom and top parts of
the milk dispensing spout as illustrat-
ed.
17- Close the milk dispensing spout cover.
Monthly cleaning of the milk carafe
In order to keep the entire circuit free of
milk residue and to guarantee the best and
long-lasting performance of the carafe, we
advise performing a monthly cleaning cycle
with ''Saeco Milk Circuit Cleaner'', which is
sold separately.
Before starting the cleaning cycle, check that the
On/Off button and product buttons are con-
stantly lit and that there is enough water in the tank.
1-
Remove the milk carafe lid and wash both components in luke-
warm running water.
2-
Fill the carafe up to the MAX level with fresh, lukewarm water.
3-
Pour the detergent product into the milk carafe and let it dissolve
fully.
4-
Replace the lid on the carafe, insert it into the machine and place
a container under the milk dispensing spout.
Warning! dispensing may be preceded by small jets
of hot water: danger of scalding! if the carafe is ab-
sent, products requiring milk should not be selected.
13-
Open the dispensing spout lid.
18-
Insert the fitting into the rubber tube as
illustrated.
19-
Push the milk dispensing spout onto the
fitting.
21-
Insert the tube into the opening in the
milk dispensing spout.