Saeco Royal OTC, Руководство по эксплуатации и обслуживанию

Страница: 10 / 80

English
10
2
2 INFORMATION ABOUT THE APPLIANCE
2
2.1 Information for the
Maintenance Technician
2
The appliance must be
installed
in a well-lit,
sheltered and dry place
and on a table suitable to
bear its weight.
22
To ensure its correct operation and reliability over
time, comply with the following recommendations:
2
• ambient temperature: from +2°C to +32°C;
2
• maximum humidity allowed: 80% (non-condensed).
22
For special installations, not covered by this manual,
please contact the dealer or the local importer. If this
is not possible, please contact the Manufacturer.
22
The technical service is available for any explanation or
information regarding the correct operation of the
machine and to satisfy any request for spare parts
supply or technical assistance.
22
The Maintenance Technician must carefully read and
observe the safety warnings contained in this manual
to ensure that installation, start-up, use and
maintenance operations are performed in complete
safety.
22
This manual is an essential part supplied with the
machine and should always be available for reference
before any operation on the machine.
2
2.2 Description and Intended Use
2
This machine is automatically used to brew:
2
• coffee and espresso coffee using instantly ground
coffee beans;
2
•
hot beverages using hot water dispensed via the
dispensing spout.
2
• milk-based beverages using the Cappuccinatore
supplied.
2
The elegant machine housing has been designed for use
in small offices, businesses and institutions.
2
Using the machine for any other purpose is considered
dangerous and as a misuse.
22
Misuse voids all forms of
warranty,
releasing the
Manufacturer from any
responsibility for damage
to
property and/or
personal injury.
2
The following are also
considered misuse:
2
• any use other than the intended use and/or
employing methods other than those described in
this manual;
2
•
any operation on the machine in breach of the
instructions provided in this manual;
2
•
any tampering with parts and/or safety devices not
previously authorised by the Manufacturer and
performed by unauthorised personnel;
2
• machine installation in an outdoor environment.
22
In such cases the customer will be charged with the
machine repair cost.
2