background image

All parts of this document are the property of Philips. 

All rights reserved. This document and all the information herein is provided without liability deriving from any errors or omissions. Furthermore, no part may be reproduced, used or 

collected, except where express authorisation has been provided in writing or through a contractual agreement.

Published by Philips 

 

                                                 

Subject to modification

 

 

 

                                   

EN 4219 400 00028

Service

Coffee Machine

Incanto

OTC

AMF-

CMF

EXT

2016

2016

2016

2015-May-30

 Service

 

Manual

 

  

 

Rev. 04 JULY 2016

 

General Information
Description

Value

Housing material

Thermoplastic type

Size (w x h x d)

221 x 340 x 430 mm (data may vary depending on the model)

Size  EXT(w x h x d)

221 x 386 x 430 mm (data may vary depending on the model)

Weight

7,5 kg (data may vary depending on the model) 8 kg (EXT)

Power cord length

800 - 1200 mm

Control panel

Front type

Cup size

Up to 152 mm

Water tank

1.8 litres - 2.5 litres (EXT) Removable type

Coffee bean hopper capacity

250 g - 500 g (EXT)

Coffee grounds drawer capacity

15

Milk carafe capacity

0,5 l (OTC version)

Pump pressure

15 bar

Boiler

Stainless steel boiler

Safety devices

Thermal fuse

Energy saving mode

< 1 Wh

Nominal voltage - Power rating - Power supply

Read the data plate placed inside the service door

Содержание OTC SERIES































































Отзывы: