17
2
3
4
6
7
5
1
Press the “PUSH” button to
remove the group.
Make sure the group is in rest
position; the two references must
match.
Wash the Brew Group with
running water. Wash fi lters
carefully.
CLEANING THE BREW GROUP
The Brew Group must be cleaned at least once a week. Before removing the Brew Group, remove the
dregs drawer as shown in fi g. 4 on page 16. Once you have washed and inserted the Brew Group, insert
the dregs drawer and close the service door.
Make sure the components are in
the correct position.
The hook shown must be in the
correct position; to check its
position, fi rmly press the “PUSH”
button.
Insert the washed and dried Brew
Group.
DO NOT PRESS THE “PUSH”
BUTTON.
Insert the dregs drawer and close
the service door.
The lever on the rear part of the
group must be in contact with
the Brew Group base.
