12
ENGLISH
Manual rinse cycle
During this process you brew a co
ff
ee and fresh water
fl
ows through the
steam/hot water circuit. This takes a few minutes.
1
Place a container under the dispensing spout.
2
Check that the “
”, “
”, “
” “ ” lights
fl
ash steadily.
3
Press the “
” button. The machine starts dispensing water.
4
When the dispensing has
fi
nished, empty the container.
Repeat the operations from step 1 to step 3 twice, then continue with
step 5.
5
Place a container under the Pannarello.
6
Press the “
” button to start dispensing hot water.
7
Dispense water until the no water light “ ” shines steadily.
8
At the end,
fi
ll the water tank again up to the MAX level. Now the the
machine is ready for brewing co
ff
ee.
Note:
When you haven’t used the machine for 2 or more weeks, the machine
will automatically perform an automatic rinse/self-cleaning cycle after
you switch it on. Thereafter you need to initiate the manual rinse cycle as
described above.
The automatic rinse/self-cleaning cycle is also initiated automatically when
starting up the machine (with cold boiler), when the machine is preparing
to go into stand-by mode, or you have pressed the “ ” button (after a
co
ff
ee has been brewed).