11
ENGLISH
2
Press the “
” button to start the cycle. The machine starts the au-
tomatic priming of the circuit by dispensing some water through the
Pannarello.
3
When the process is completed, the “
”and “
” buttons
fl
ash. The
machine is in warm-up mode.
Automatic rinse/self-cleaning cycle
When warm-up is completed, the machine automatically performs a rinse/
self- cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
4
Place a container under the dispensing spout to catch the small
amount of water which will be dispensed.
5
The “
” and “ ” buttons
fl
ash during the whole process. Wait for the
cycle to
fi
nish automatically.
6
Wait for the cycle to
fi
nish automatically.
Note:
You can stop dispensing as well, by pressing either the “
” or “ ” but-
ton.
7
When the above steps are complete, check that the buttons “
”,“
”,
“
” “ ”
fl
ash steadily.