31
ENGLISH
10
Remove the water tank, rinse it and fi ll it up to the MAX level with fresh
water. Place it back into the machine.
11
Empty the drip tray and place it back.
12
Empty the container and place it back under the steam/hot water
wand and the dispensing spout.
13
Press “
” to start the rinsing cycle.
14
When the rinsing is fi nished, the “
” light turns on and the “
”but-
ton fl ashes.
15
Remove the water tank, rinse it and fi ll it up to the MAX level with fresh
water. Place it back into the machine.
16
Empty the drip tray and place it back.
17
Empty the container and place it back under the steam/hot water
wand and the dispensing spout.
18
Repeat steps 13 to 17 once more. Then continue with step 19
19
The machine heats-up and the automatic rinsing cycle starts to prepa-
re for product brewing.
20
The descaling cycle is completed.
21
Place back the “” water fi lter into the water tank if it was
installed and the Pannarello.
Note:
At the end of the descaling cycle, wash the brew group as described in the
“Weekly Cleaning of the Brew Group” chapter.
The two rinse cycles are performed in order to have the circuit cleaned
with a preset amount of water to ensure proper machine performance.
If the water tank is not fi lled up to MAX level, the machine might require
three or more cycles.
