Saeco Intelia, Руководство по обслуживанию

Страница: 47 / 77

INTELIA 05 TROUBLESHOOTING
Saeco International Group Rev. 02 / September 2012 Page / 22
Initial status Initial status
Press the espresso button to activate the solenoid valve
Press the coffee button to activate the solenoid valve
Press the aroma button to activate the pump
Operational check - solenoid valve and pump
If the dreg drawer is in position and the side hatch closed, the EV cannot If the dreg drawer is in position and the side hatch closed, the EV cannot
be done. If it is not in the right position, a warning message is shown on be done. If it is not in the right position, a warning message is shown on
the display, which turns yellow. the display, which turns yellow.
The indication next to EV1 changes from “OFF” to “ON”. The indication next to EV1 changes from “OFF” to “ON”.
You can hear the “click” of the solenoid valve. You can hear the “click” of the solenoid valve.
The indication next to EV2 changes from “OFF” to “ON”. The indication next to EV2 changes from “OFF” to “ON”.
You can hear the “click” of the solenoid valve. You can hear the “click” of the solenoid valve.
ERROR: The back-lit green display changes to red and the pulse remains ERROR: The back-lit green display changes to red and the pulse remains
0 even if water comes out of the steam pipe, check the wiring on the fl ow 0 even if water comes out of the steam pipe, check the wiring on the fl ow
meter (JP5). If water does not come out of the steam pipe, check the pump meter (JP5). If water does not come out of the steam pipe, check the pump
and the pump wiring (JP24). and the pump wiring (JP24).
The water is dispensed from the steam pipe IMP indicates an increasing The water is dispensed from the steam pipe IMP indicates an increasing
number of pulses. L/H must be between 10 and 18. number of pulses. L/H must be between 10 and 18.
Press STAND_BY “ Press STAND_BY “ ” to move to the next screen ” to move to the next screen
14