28
Grinder settings
3
1
2
a
b
fig.1
fig.2
fig.3
To calibrate the grinders, proceed as follows:
1) Press the pin (pos.1 / fig.2) and rotate the ringnut (pos.2 / fig.2) clockwise (fig.1 / a) to fully
tighten down the grinders (DO NOT FORCE).
2) The rotate the ringnut anticlockwise (fig. 1 / b) so that the two blue dots (on the upper ringnut
and the activation button) are aligned (pos. 3 / fig.2).
N.B. The final position (after calibration) must be aligned approximately with the
second dot on the container adjustment knob (see fig.3)
EN Incanto DOT.indd
18/05/2005, 12.05
28
