Saeco Incanto HD8911, Руководство пользователя

Страница: 32 / 72

Problem Cause Solution
The frothed milk is too
cold. The cups are cold. Warm the cups with hot water.
The milk does not froth. The classic milk frother is dirty or not
assembled correctly. Clean the classic milk frother and
make sure it is correctly assembled
or installed.
The type of milk used is not suitable
for frothing. Different types of milk result in
different amounts of froth and
different froth qualities. We have
tested the following milk types
which proved to deliver a good
milk froth result: semi-skimmed or
full-fat cow's milk, soy milk and
lactose-free milk. Other types of
milk have not been tested and
may result in a small amount of
milk froth.
The AquaClean filter
cannot be activated as the
tick does not appear on
the display. A filter has just been activated. You have to dispense at least 10
cups (of 100ml each) before you
can activate a new filter. Be careful
when you activate a new filter; the
filter counter will increase
automatically.
The AquaClean filter
cannot be activated and
the machine asks for
descaling. You have already replaced 8
AquaClean filters. After 8 filter
replacements you need to descale
the machine. Descale your machine first and
then install the filter. Always
activate the AquaClean filter in the
menu (see 'Activating the
AquaClean filter '). Also do this
when you replace the filter.
The filter has not been replaced in
time after the AquaClean water filter
signal flashed and the capacity
dropped to 0%.
Descale your machine first and
then install the filter.
The filter has not been installed
during first installation but after
having brewed approx.50 coffees
(based on 100ml cups). The machine
has to be completely limescale-free
before installing the AquaClean filter. First descale the machine and
then install a new AquaClean filter.
After descaling, the filter counter is
reset to 0/8. Always confirm filter
activation in the machine menu.
Also do this when you replace the
filter.
The new or replaced AquaClean filter
was not activated via the machine
menu. Also after replacing the filter,
you need to confirm activation via
the machine menu. Descale your machine first. Then
activate the AquaClean filter in the
menu (see 'Activating the
AquaClean filter '). Also do this
when you replace the filter.
32
English