80
ENGLISH
Machine actions
Causes
Solutions
The machine takes a
long time to warm up or
the amount of water dis-
pensed from the wand is
too little.
The machine circuit is clogged by
limescale.
Descale the machine.
The brew group cannot
be removed.
The brew group is out of place.
Turn on the machine. Close the ser-
vice door. The brew group automati-
cally returns to the initial position.
The coff ee grounds drawer is
inserted.
Remove the coff ee grounds drawer
before removing the brew group.
The brew group cannot be
inserted.
The brew group is not in the off
position.
Make sure that the brew group is in the
off position. The arrows must face each
other. To this purpose, see the “Monthly
Lubrication of the Brew Group” chapter.
The gear is not in the initial posi-
tion.
Insert the drip tray and the coff ee
grounds drawer and close the service
door. Turn on the machine. The gear
automatically returns to the initial
position. You can now insert the brew
group.
There is a lot of ground
coff ee under or over the
brew group.
The coff ee used may not be suit-
able for automatic machines.
You may need to change the type of
coff ee or the coff ee grinder settings
(see the “Adjusting the Ceramic Coff ee
Grinder” chapter).
The machine is adjusting the coff ee
grinder for a new kind of coff ee
beans or pre-ground coff ee.
The machine automatically adjusts
itself after brewing several cups of
coff ee in order to optimise extraction in
relation to the compactness of ground
coff ee.
It may be necessary to brew 2 or 3
products to completely adjust the cof-
fee grinder.
This is not a machine malfunction.
The machine produces too
humid or too dry coff ee
grounds.
Adjust the coff ee grinder.
Adjusting the ceramic coff ee grinder
aff ects the quality of residues.
If the residues are too humid, set a
coarser grind.
If the residues are too dry, set a fi ner
grind.
Refer to the “Adjusting the Ceramic Cof-
fee Grinder” chapter.
