Saeco CRISTALLO 600, Использование и обслуживание

Страница: 19 / 64

19
English
Fig. 37
Fig. 39
Fig. 38
Warning
The Manufacturer declines any liability for any damage to
the vending machine, to property and/or injury to persons,
caused by the installation of the payment system. The
responsibility falls to the person who carried out the
installation.
5.8 Connection to water
mains
Important
It is recommended to use a descaling device for the water
network supplying the vending machine, especially for water
with a high calcium and magnesium content (hard water).
Connect the vending machine to a drinking water supply
pipe with a pressure ranging between 1.5 and 8 bars (see
data plate).
Remove the cap from the coupling placed on the vending
machine back panel (Fig. 37). Connect the water supply
pipe to the 3/4" Gas coupling of the vending machine (Fig.
37).
5.9 Connection to the
electric network
Warning
The Maintenance Technician, who is responsible for the
installation of the vending machine, must ensure that:
-
the electric system complies with current safety regulations;
- the supply voltage corresponds to that indicated on the
data plate.
If in doubt, do not proceed with the installation and ask
qualified and authorized personnel to check the system
accurately.
The vending machine is equipped with a power cord which
must be plugged into the appropriate socket on the vending
machine back panel (Fig. 38).
Do not use adapters or multi-sockets (Fig. 39).