Saeco Cristallo 600 EVO, Использование и обслуживание

Страница: 50 / 112

English
9
50
9.2.3 Description of messages in the programming menu
DISPLAY Description
1. The SYSTEM MANAGEMENT items are:
SYSTEM MANAGEMENT
…
1.1. Enables an identification code to be assigned to the vending machine.
VM Code
531000
1.2. Enables setting of the maximum amount of beverage or coffee.
Once the maximum amount is reached, the vending machine stops dispensing the relevant beverages.
The first digit on the left (“00000”) refers to the quantity of product dispensed since the last “RESET” (partial
counters).
The right hand digit, preceded by “LIM”, shows the maximum dispensable quantity (value may be modified).
Stops
…
1.2.1. Enables setting of the maximum number of coffee cups to be dispensed before the stop.
Stop coffee C
1.2.2. Enables setting of the maximum number of beverages to be dispensed before the stop.
Stop beverages
1.2.3. Enables resetting of all partial counters relative to product quantity stop functions.
Reset
1.3. Allows the use of the water filter to be checked.
Water Filter
…
1.3.1. Date of the last filter reset.
Last filter change
31.01.2008
1.3.2. Number of litres of water that can still be dispensed before the filter needs to be
regenerated.
When this value is less than 1, a Warning (W83) is recorded in the Error LOG.
Remaining qty
95
1.3.3. Number of litres of water that can still be dispensed from the filter.
Filter limit
100
1.3.4. Select YES to indicate a new filter has been installed
This operation returns “Remaining Qty” to the same value as “Filter Limit” and the date in
the “Last Filter Change” is changed to today’s date.
Filter reset
1.3.5.
Enables management of the "Remaining Qty" countdown.
Important
From the maintenance menu (button P2 on the CPU), you can access "Water Filter", "Last
Filter Change", "Remaining Qty" and "Filter Reset".
Filter enabled
yes
1.4. It enables setting the coffee boiler management parameters.
Boiler 1 temp.
00
1.4.1.
It allows you to set the temperature that the vending machine keeps for a few minutes after
a beverage has been brewed.
The set value is expressed in centigrade.
Min. Temperature
90
1.4.2. It allows you to assign the temperature to which the vending machine is brought after a
certain time from the last dispensing, so that the natural lowering of the temperature of the
hydraulic circuits can be compensated.
The set value is expressed in centigrade.
Max. Temperature
100
1.5. The “Stand-by” and “ECO” modes allow reducing the energy consumption of the machine.
It is possible to select one or both modes.
Energy save
…