Saeco Cafissimo HD8603, Руководство по эксплуатации

Страница: 18 / 23

• 30 •
20-
Fit the milk dispensing spout back into its
housing. You should hear and feel it click
into place.
14-
Remove the lower part of the dispensing
spout.
15-
Clean all the components under luke-
warm running water. The internal parts
of the frothing system are dishwasher
safe. When all components have been
cleaned, reassemble them following the
same procedure, but in reverse order.
Assembly procedure of the milk jug:
16- Connect the bottom and top parts
of the milk dispensing spout as
illustrated.
17-
Make sure that the two parts are
correctly fi tted together. No gaps
Monthly cleaning of the milk carafe
In order to keep the entire circuit free of milk residue and to
guarantee the best and long-lasting performance of the carafe, we
advise performing a monthly cleaning cycle with “Saeco Milk Circuit
Cleaner“, which is sold separately.
Before starting the cleaning cycle, check that the
On/Off button and product buttons are con-
stantly lit and that there is enough water in the tank.
1-
Remove the milk carafe lid and wash both components in luke-
warm running water.
2-
Fill the carafe up to the MAX level with fresh, lukewarm water.
3-
Pour the detergent product into the milk carafe and let it dissolve
fully.
4-
Replace the lid on the carafe, insert it into the machine and place
a container under the milk dispensing spout.
Warning! Dispensing may be preceded by small jets
of hot water: danger of scalding! If the carafe is
absent, products requiring milk should not be selected.
13- Open the dispensing spout lid.
should be visible. Then close the milk
dispensing spout lid.
18-
Insert the fi tting into the rubber tube as
illustrated.
19- Push the milk dispensing spout onto the
fi tting.
21- Insert the tube into the opening in the
milk dispensing spout.
NO
4219_404_3749_2_148X210_BW_V8.indd 30 13/11/15 12:42