Saeco Cafissimo HD8603, Руководство по эксплуатации

Страница: 11 / 23

• 23 •
INSTALLATION
Preparing for use
Remove the coffee machine from the packaging and position it
in a suitable place.
Preparing the machine for use
1- Remove the water tank from its base.
2-
Remove the lid from the water tank.
Rinse the water tank and refill it with
fresh, cold, still drinking water. Do not
exceed the level (MAX) indicated on
the water tank.
3-
Replace the lid on the water tank.
4- Replace the water tank on its base.
Hot water or any other liquids may damage the tank
and/or the machine. Do not operate the machine
without water. Always make sure that there is enough water
in the tank.
5- Insert the plug into an earthed wall socket with suitable power
voltage.
6- To turn the machine on, simply press the On/Off button on the
control panel.
7-
The service indicator light (orange) will flash until the water
tank is filled. Proceed as described in the next section.
Using the machine for the first time or after a
period of inactivity
The simple operation described below ensures optimal brewing and
must be performed:
- when using the machine for the first time;
- when the machine has been inactive for a long time (more
than 2 weeks). In this case, make sure that any remaining used
capsules in the used capsule drawer have been disposed of.
1-
Rinse the tank and fill it again with
fresh drinking water.
2- Place a cup below the coffee dispens-
ing spout as shown in the figure.
3- Press the caffè crema button
(yellow) without inserting a
capsule.
4- When the cup is full, press the caffè
crema button to stop the brewing
process, then empty the cup.
5-
Repeat
steps 2
to
4
until all the water in the tank has been
dispensed.
6-
When all the water has been dispensed, refill the tank and
repeat
steps 2
to
5
.
7- Refill the water tank; the machine is now ready to be used.
Automatic switch-off
The machine automatically turns off after 9 minutes of inactivity.
To reactivate the machine, simply press the On/Off button .
The machine can be turned off manually by pressing the On/Off
button .
Adjusting the dispensing height
The machine can be used with a variety of cup sizes in which to
dispense your beverage.
The coffee dispensing spout and drip tray can be moved to create
various dispensing positions.
Follow these simple instructions to use your desired cup or glass:
Espresso cup or caffè crema cup :
coffee dispensing spout lowered and drip
tray in the middle position.
English
4219_404_3749_2_148X210_BW_V8.indd 23 13/11/15 12:42