31
English
Programmable texts
STAND-BY TEXT:
it enables
s e t t i n g t h e m e s s a g e
appearing on the display
when the vending machine is
in standard operating mode.
D I S P E N S I N G T E X T : i t
allows setting the message
appearing on the display
when the vending machine is
dispensing a product.
SET 1 PRE-SELECTION
Allows setting the display
message when the pre-
selection mode of the button
16 is activated for beverages 21-35 and 37-40.
SET 2 PRE-SELECTION
Allows setting the display
message when the pre-
selection mode of the button
17 is activated for beverages 41-55 and 58-60.
OUT OF SERVICE TEXT: it
enables setting the text on
the display when the vending
machine stops due to a fault.
Contrast
Adjusts the contrast of the
display.
Stirrer
Enables selection of the stirrer
dispensing mode.
STIRRER ALWAYS: the stirrer is dispensed anyway;
STIRRER SUGAR: the stirrer is dispensed only if the beverage
is served with sugar;
STIRRER SUGAR or BITTER: the stirrer is dispensed for all
the beverages which should be served with sugar, although
the user requires them without it.
Coffee / beverage pulse
counter
Enables selection of whether
the 24V dc electromechanical
pulse counter (optional – to be connected to the CPU card)
has to count the coffees or all dispensed beverages.
INST.PROD.PREHEAT.
INSTANT PRODUCT 01
10
INSTANT PRODUCT 02
0
Pre-grinding
Enables instant pre-grinding
of the coffee dose.
Preheat. solubles
Enables selection of the
instant products for which
the preheating function will
be enabled.
By enabling this function, the vending machine performs
a preliminary dispensing of water through the circuit
corresponding to the instant product selected. The user can
choose for which instant product prerinsing can be enabled,
by setting cu cm of water to be used.
1.8.
Pre-grinding
yes
1.9.
Soluble Preheating
yes
Example: the settings shown in the figure enable preheating
for instant product 1 with 10 units of water and do not
enable preheating for instant product
2
.
Instant product preheating takes place if:
- at least 3 minutes have passed since the mixing bowl
was last used;
- the quantity of water for the instant product is < 50
units.
Coffee preheating
It allows enabling a pre-
heating cycle of the Brew
Group if it remains inactive
for a period of time.
PREHEATING TYPE
Enables or disables brew
group preheating by a puff
of steam. Such preheating
makes the machine reach the ideal temperature before
dispensing coffee after a break.
The “Light” setting is suggested for locations with a room
temperature above approx. 22 C°, while the “Strong”
setting is suggested for locations with a room temperature
below approx. 22 C°.
1.10.
Coffee Preheating
00
1.10.1.
Preheating Type
1.11.
Programmable Texts
...
1.11.1.
Standby
** ATLANTE **
1.11.2
Dispensing
1.11.5.
Out of service
Chiama assist.
1.12.
Display Contrast
1.14.
Pulse Counter
1.13.
Stirrer
1.11.3
Group1 Preselection
1.11.4
Group2 Preselection
