44
6
5
4
After approximately 2000 grinding cycles, the grinder needs a slight adjustment to ensure it is running in
peak condition.
Warning!
This operation should be carried out carefully and by an experienced user. The screw could fall into the
grinder; if this happens remove it before restarting the machine. Protect the grinder hole with a cloth to
avoid this problem. The snap is signalled by a message on the coffee bean hopper; refer to these messages
when this adjustment is performed.
eMpTY The Coffee bean hopper.
gRINDER mAINTENANCE
adjust until it clicks.
Remove screws and grinder door.
Unscrew the screw that holds the
grinder door closed.
Then reposition the grinder and attach it with the previously removed screw.
10
12
11
apply the grease evenly.
Insert the dregdrawer.
close the service door.
Insert the washed and dried brew
group. do not press the
“PUSH” BUTTON.
3
repeat the cycle, turn off the
machine and unplug it.
1
Press and dispense two coffees.
2
add coffee
beans
ok
When the following display appears,
press “ok” and repeat the operation
from point 1 just one time.
show icon
explanation
my custom
coffee
program-
ming
menu
CleanIng and MaInTenanCe
