41
ERROR CODES
GUIDE MESSAGE THAT APPEARS
HOW TO REMOVE THE MESSAGE
(switch the machine off and then on again to
solve the problem)
Turn off and after 30 minutes turn the machine on again
to restore normal operation.
(call customer service center.)
Problem that requires the intervention of the customer
service center.
(insert drip tray)
Insert drip tray under the brew group.
(close coffee container)
Close the coffee bean hopper cover to be able to brew
any product.
(add ground coffee)
This message guides the user when, in the customized
product programming, the use of this type of coffee has
been chosen.
(insert the brew unit)
Insert the brew group in its place.
(insert dreg drawer)
Insert the dregsdrawer
(empty dreg drawer)
Remove the dregsdrawer and empty the grounds in an
appropriate container.
Note: The dregsdrawer must be emptied only when the
machine requires it and when the machine is turned on.
Emptying the drawer with the machine turned off does
not allow the machine to register that it has been
emptied.
(close the door)
To be able to make the machine functional, the side door
must be closed.
(refi ll water tank)
The tank must be removed and refi lled with fresh
drinking water.
(empty drip tray)
Open the side door and empty the drip tray under the
brew group)
(insert the milk container)
Insert the milk container in the appropriate compartment
(prime the circuit)
Press on the display in order to proceed with manually
priming the water circuit. The machine performs an
automatic attempt to prime the circuit. If this attempt
does not perform correctly you must proceed with these
instructions.
(circuit priming failure)
Contact the customer service center (toll free number) to
request assistance on how to resolve the problem.
(the descaling cycle has not been completed
correctly)
Repeat the operation as described in the appropriate
section.
(rinse milk)
see page 13 and 27.
(milk cleaning)
see page 13 and 28.
