Sachtler Studio 9+9, Руководство пользователя

Страница: 9 / 28

- 3 -
Studio 9+9 Manual
Á
The springs of the counterbalance engage automati-
cally by tilting the camera through the horizontal posi-
tion (audible clicking).
Á
Lock the head with the tilt safety lock.
The blocking and clicking into position of the tilt safety
lock is achieved by pulling out the red knob and turning it
90°. Green marking on the red knob becomes invisible.
Make sure that the tilt safety lock has engaged (The head
can’t be tilted any more).
Á
Put the front of the camera plate in place first.
Á
By fitting the camera onto the head it will lock automa-
tically and the locking lever will snap back audibly into
its initial position.
3.4 Removing of the camera
Á
Lock the head with the tilt safety lock.
The blocking and clicking into position of the tilt safety
lock is achieved by pulling out the red knob and turning it
90°. Green marking on the red knob becomes invisible.
Make sure that the tilt safety lock has engaged (The head
can’t be tilted any more).
Á
Hold the camera with one hand.
Á
Grasp the locking lever with your thumb and index and
pull down the red safety button.
Á
Move the locking lever as far as possible to the left
and take out the camera plate.