Sachtler Cine 30 HD, Руководство пользователя

Страница: 15 / 34

- 9 -
Cine 30 HD
Manual
ATTENTION
: Panning or tilting the camera with settings
between the indexed position can damage the retainer pins
and/or disks.
If you set the setting rings on the same index number
(e. g. ”3”) the degree of the horizontal and vertical damping
is identical and thus enables precise diagonal panning
movements without jerks and vibrations.
3.9 Brakes
The horizontal brake applies the lock for the pan and the
vertical brake for the tilt movement. Both brakes are vibra-
tionless and can be used during shooting.
3.10 Support for viewfinder extension
The fluid head has a preparation to accept a support
system for a viewfinder extension.
3.11 Change of the batteries
The illumination is powered by three standard type button
cells (625 U or LR9) located in the battery holder, which
can be opened with a tapered object such as a screwdriver.
Make sure to insert the new batteries according to the
”plus” and ”minus” symbols as indicated in the covering
plate.
The batteries last for about 2000 illumination cycles.
3.12 Transport setting of damping, counterbalance
and brakes
To ensure smooth operation of the setting rings for the
damping over the long life time period of the fluid head, you
should turn both setting rings from position “0“ to maximum
position, before and after the use of the fluid head.
Setting during transportation: the most important issue is to
open both brakes - horizontal and vertical. Counterbalance
and damping should be set to maximum position.