Sachtler Cine 30 HD, Руководство пользователя

Страница: 13 / 34

- 7 -
Cine 30 HD
Manual
3.5 Removing of the camera
!
Lock the head with the tilt safety lock.
The blocking and clicking into position of the tilt safety
lock is achieved by pulling out the red knob and turning
it 90°. Green marking on the red knob becomes invisi-
ble. Make sure that the tilt safety lock has engaged.
(The head can’t be tilted any more.)
!
Hold the camera with one hand.
!
Press the red safety lock.
!
Open the sideload lever until the stop position (about
180°).
!
Press down the snap lock.
!
Take out the camera.
3.6 Positioning of the camera
!
Hold the camera by securing the pan bar.
!
Apply horizontal brake and release vertical brake and
tilt safety lock by pulling out the red knob and turning it
90°. Green marking on the red knob becomes visible
(rocking the pan bars up and down will facilitate this).
!
Turn the counterbalance knob to position 1.
Keep on holding the camera.
!
Switch the payload range to position „low“ at the heads
front side. Keep on holding the camera.
!
Select 0 on the vertical drag adjustment ring.
!
Press the red safety lock.
!
Open the sideload lever about 90°.
!
To balance the camera correctly, bring the C.O.G. of the
camera right above the pivoting point of the fluid head.
Compensate for a back heavy setup by sliding the
camera plate forward and for a frontheavy setup by sli-
ding backwards.