Sachtler Ace, Руководство пользователя

Страница: 6 / 68

-2-
EN EN
Safety instructions
Read the General Safety and
Operating instructions before using
the product.
WARNING! Finger entrapment. Do not
place fingers between the upper and
lower platform when adjusting the
height of the Ace Base Plate. Avoid
trapping fingers when adjusting the
height of the Ace Base Plate.
WARNING! Ensure that the camera
slide plate engages with the retention
latch on the Ace Base Plate platform.
Failure to do so could cause personal
injury or damage to equipment.
Hold the camera securely when

(a) mounting or dismounting from the
Ace Base Plate (b) when making
adjustments to the tripod height or
footprint.
Ensure that the support rods are
installed through both the front and
rear support rod housings. Failure to
do so could cause damage to the Ace
Base Plate.
Clean regularly using a soft cloth and
mild detergent.
Dry the product after use in wet
conditions.
Should the product become defective,
contact your local Sachtler service
centre. To find your local service
centre visit www.sachtler.com
Usage
The Ace Base Plate is designed for use by
professional camera operators to support and
balance high-performance lightweight
cameras and ancillary equipment weighing up
to 6 kg (13.2 lb). The Ace Base Plate must be
mounted onto a suitable head and tripod
designed to support the total payload.
Warranty
The warranty expires if:
(a) The Ace Base Plate was operated
improperly or not in line with the specified
technical data.
(b) The Ace Base Plate housing was opened
by unauthorized personnel.
Sachtler reserve the right to make changes to
product design and performance as

technology advances.


Please register your product for an extended
warranty period at www.sachtler.com
Scan Quick Reference (QR)
code to visit the Sachtler

website.
Technical specification
0.55 kg (1.2 lb)
Fully retracted - 4.8 cm (1.9 in.)

Fully extended - 7.2 cm (2.8 in.)
11.4 cm (4.5 in.)
13.3 cm (5.2 in.)
6 kg (13.2 lb)