SAC ROTO-PRESS 904, Руководство по эксплуатации и обслуживанию

Страница: 14 / 43

7
MAINTENANCE
1. When the bag is full and has been properly closed it will require a minimum amount of
maintenance. It is advised that a periodic check be made around the bag to check for any
holes that need to be patched. Good rodent control is a must, so keep spilled feed to a
minimum when filling to prevent rodent attraction to the location.
OPTIONS
1. When filling bags with a highly floatable product such as shell corn, corn gluten, small
grains or pellet fertilizer etc., ROTO-PRESS has a kit available that makes this type of
bagging much easier. The shell corn kit is a complete bolt on kit available from the factory.
For further details, see the enclosed diagram at the end of this manual or consult the factory.
2. ROTO-PRESS has a dual kit available for working in wet fields or spongy ground, adding
greater floatation. For further details, see the enclosed diagram at the end of this manual or
consult the factory.
3. If you add silage preservative in your bagging program, ROTO-PRESS has the set-up for
you. If using a liquid inoculate, your ROTO-PRESS is already equipped with a pipe
coupling welded into the side of the u-through. If using a pellet inoculate, there is a bolt on
Gandy applicator kit available, complete with wire harness. For further details, see the
enclosed diagram at the end of this manual or consult the factory.
4. A conveyor flow control is also available to level out the product in the conveyor. This is
used in conjunction with the silage preservative.
5. For greater compactness, a brake assist & chain installation kit is available.