SAC MAXI-MIXER 3500 TRAILER Series Скачать руководство пользователя страница 4

Страница: 4 / 104

Page # 4

877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com

OPERATION

REPLACEMENT PARTS

READ complete manual CAREFULLY

BEFORE attempting operation.

877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com

OPERATION

REPLACEMENT PARTS

READ complete manual CAREFULLY

BEFORE attempting operation.

GENERAL INFORMATION

1. Unless otherwise specified, high-strength (grade 5) (3 radial-line head markings) hex head bolts are used throughout

assembly of this piece of equipment.

2. Whenever terms

“LEFT”

and

“RIGHT”

are used in this manual it means from a position behind wagon box and

facing forward.

3. When placing a parts order, refer to this manual for proper part numbers and place order by

PART NO. and DE-

SCRIPTION.

4. Read assembly instructions carefully. Study

assembly procedures and all illustrations before you begin assembly. Note which parts are used in each step. This

unit must be assembled in proper sequence or complications will result.

WARNING:

TO AvOID PERSONAL INjuRy OR DEATH, OBSERvE FOLLOWING INSTRuCTIONS:

Never overload wagon. Rating of gear or rating of tires, whichever is less.

Ensure that anybody present is clear before applying power to any machinery used in conjunction with

wagon box or when moving box.

Never allow anyone in, near, or on mixing chamber during mixing, transporting, or unloading of feed.

Do not exceed 10 miles per hour when towing wagon.

Thank you for choosing Sioux Automations 3500 Series Vertical Mixer to complement your operation. This equipment has been

designed and manufactured to meet the needs of the discriminating buyer for efficient cutting, mixing and feeding.

Safe, efficient and trouble free operation of your mixer requires that you and anyone else who will be operating or maintaining

the machine, read and understand the Safety, Operation, Maintenance and Troubleshooting information contained within the

Operator’s Manual.

This manual covers the 3500 Series Single Auger Models by Sioux Automation Center. Keep this manual readily available for

reference and be sure to pass it on to new Operators or Owners. Contact your nearest Sioux Automation Center Dealer or Distributor

if you need assistance or information.

INTRODuCTION

Contact Sioux Automation Center, Inc. at:

877 1st Ave NW

Sioux Center, IA 51250

Phone:

(712)

722-1488

Toll

Free (866)

722-1488

Fax:

(712)

722-1487

Website: www.siouxautomation.com

CONTACT INFORMATION

Содержание MAXI-MIXER 3500 TRAILER Series









































































































Результаты поиска

Содержание MAXI-MIXER 3500 TRAILER Series

Отзывы:

Похожие инструкции для MAXI-MIXER 3500 TRAILER Series

Бренды по названию

Популярные бренды

SAC MAXI-MIXER 3500 TRAILER Series, Руководство оператора

Результаты поиска

Содержание MAXI-MIXER 3500 TRAILER Series

Отзывы:

Похожие инструкции для MAXI-MIXER 3500 TRAILER Series

Бренды по названию

Популярные бренды