Introduction to operating manual
2/38
0175-168 - ENG
Rev. 2005.09
Operating Manual - SAB 202
Introduction to operating manual
The purpose of this manual
is to describe:
•
Dangers resulting from failure to comply
with safety precautions when operating the
equipment and performing maintenance
tasks.
•
How to start, operate and stop the
equipment safely.
•
How to act when problems occur during
operation.
•
Scheduled maintenance tasks for the
equipment and when/how to carry them
out safely.
This manual is primarily intended for operators
and service engineers.
In order to prevent accidents, assembly and dis-
assembly of components should be carried out by
authorised personnel only.
•
It is important that the operating personnel
familiarize themselves with the contents of
this manual in order to ensure proper and
efficient operation. Sabroe Refrigeration
(YORK Denmark ApS) - hereafter referred
to as Sabroe Refrigeration - is not liable for
damage occurring during the warranty peri-
od where this is attributable to incorrect op-
eration.
Sabroe Refrigeration's manual concept covers six
standard manuals: Engineering, Operating, Serv-
ice, Installation and commissioning, Transport,
and Spare parts.
Therefore, reference may be made to sections
which are not part of this manual.
This manual is produced by:
Sabroe Refrigeration (YORK Denmark ApS)
Chr. X’s Vej 201, P.O. Box 1810
8270 Højbjerg, Denmark
Phone +45 87 36 70 00
Fax +45 87 36 70 05
www.sabroe.com
Reg. No 19 05 61 71
Copyright © 2004 Sabroe Refrigeration
This manual must not be copied without the writ-
ten permission of Sabroe Refrigeration and the
contents must not be imparted to a third party nor
be used for any unauthorised purposes.
Contravention will be prosecuted.
In the space below you may enter the name and address of your local Sabroe representative
