Signs and Warnings
7/38
0175-168 - ENG
Rev. 2005.09
Operating Manual - SAB 202
Unit pipe system name plate
Fig. 3
Unit pipe system name plate
The unit pipe system name plate is positioned on
the frame. The name plate contains the following
information:
•
Type
Manufacturer's type designation.
•
Year
Year of manufacture.
•
Identification no.
Individual no. for identification of supplied
pipe system.
•
Design code
For PED orders: EN 378-2
If the unit has been approved by an author-
ity, the design code will be shown here.
•
Approval
no.
If the unit has been approved by an author-
ity, the approval no. will be shown here.
•
Pressure system
Low pressure side of compressor piping is
referred to as
LP.
High pressure side of compressor piping is
referred to as
HP.
•
Fluid/Group
Refrigerant designation according to
ISO817 or fluid group according to directive
67/548/EEC.
•
Max. allowable pressure, PS
Shows max allowable pressure relative to
atmospheric pressure for which the pipe
system has been designed.
•
Leak test pressure, PT
Shows the pressure with which the pipe sys-
tem has been leak tested.
•
Design temperature, TS
Shows min and max temperatures for which
the pipe system including components has
been designed.
•
CE xxxx
The four digits compose the registration no.
of the notified body in charge of the assess-
ment modules for the vessel.
