Sabo 97-14 HS, Руководство оператора

Страница: 43 / 68

Service Miscellaneous - 39
SERVICE MISCELLANEOUS
Service Miscellaneous
Filling Fuel Tank
Use regular grade 87 octane unleaded fuel.
Add Marken fuel stabilizer to fuel before using it in your
machine to prevent engine damage due to stale fuel. Follow
directions on stabilizer container.
1. STOP engine, let it cool several minutes before you add
fuel.
2. Lift hood.
3. Remove grass clippings and other trash from tank area.
4. Remove fuel tank cap (A).
5. Fill tank with fuel only to bottom of filler neck.
6. Install fuel tank cap and lower hood.
Cleaning and Repairing Plastic Surfaces
Your SABO dealer has the professional materials needed
to properly remove surface scratches from any plastic
surfaces, do not attempt to paint over marks or scratches in
plastic parts.
1. Rinse hood and entire machine with clean water to
remove dirt and dust that may scratch the surface.
2. Wash surface with clean water and a mild liquid
automotive washing soap.
3. Dry thoroughly to avoid water spots.
4. Wax the surface with a liquid automotive wax. Use
products that specifically say “contains no abrasives.”
5. Buff applied wax by hand using a clean, soft cloth.
Cleaning and Repairing Metal Surfaces
Cleaning:
Follow automotive practices to care for your tractor painted
metal surfaces. Use a high-quality automotive wax
regularly to maintain the factory look of your tractor’s
painted surfaces.
Repairing Minor Scratches (surface scratch):
1. Clean area to be repaired thoroughly.
2. Use automotive polishing compound to remove surface
scratches.
3. Apply wax to entire surface.
Repairing Deep Scratches (bare metal or primer
showing):
1. Clean area to be repaired with rubbing alcohol or
mineral spirits.
2. Use paint stick with factory-matched colors available
from your SABO dealer to fill scratches. Follow directions
IMPORTANT: Avoid damage! Dirt and water in fuel
can cause engine damage:
• Use a non-metallic funnel with a non-metallic
mesh strainer when filling fuel containers.
• Use a non-metallic funnel with a non-metallic
mesh strainer when filling the fuel tank.
• Fill the fuel tank at the end of each day’s
operation to keep condensation out of the fuel tank.
• Use clean, fresh, stabilized fuel.
M96452
A
IMPORTANT: Avoid damage! Improper care of
machine plastic surfaces can damage that surface:
• DO NOT wipe plastic surfaces when they are dry.
Dry wiping will result in minor surface scratches.
• Use a soft, clean cloth (bath towel, diaper,
automotive mitt).
• DO NOT use abrasive materials, such as
polishing compounds, on plastic surfaces.
• DO NOT spray insect repellent near machine.
• DO NOT spill fuel on plastic surfaces. Wipe up
fuel immediately.
IMPORTANT: Avoid damage! Do not use a power
buffer to remove wax.
IMPORTANT: Avoid damage! DO NOT use rubbing
compound on painted surfaces.