manualshive.com logo in svg

Sabo 97-14 HS, Руководство оператора

Поделиться
Скачать
Sabo 97-14 HS Скачать руководство пользователя страница 19

Operating Machine - 15

OPERATING MACHINE

Avoid Using Ground Engaging Equipment

This tractor is not intended for use with ground engaging 
equipment such as a rear tiller, disk, blade or plow.

Using Front Weights

Install front wheel weights, two required, for better stability 
and steering control when you use equipment such as the 
rear-mounted grass bagger or dump cart.

See your Authorized Service Center for Front Weights.

Remove front wheel weights when not required.

Using Rear Wheel Weights

Use of rear wheel weights is recommended for improved 
traction when an attachment, such as a blade is used.

See your Authorized Service Center for Rear Weights.

Using Tire Chains

Tire chains are recommended under certain conditions, for 
use with the front blade.

See your Authorized Service Center for Tire Chains.

Transporting

Do not tow machine.

Use a heavy-duty trailer to transport your machine.

Raise mower deck to highest position when transporting to 
trailer.

Disengage PTO.

Drive forward onto trailer.

Lower mower or any attachment to trailer deck. 

LOCK park brake.

Be sure trailer has all the necessary lights and signs 
required by law.

Fasten machine to trailer with heavy-duty straps, chains, or 
cables. Both front and rear straps must be directed down 
and outward from tractor.

IMPORTANT: Avoid damage! This tractor is NOT 
intended for use with ground engaging equipment. 
Use of such equipment could result in damage to 
transmission components.

c

 CAUTION: Avoid injury! Tractor front wheel 

weights improve stability in most slope 
operation. To avoid injury, add front wheel 
weights for better front-end stability and 
steering when using a rear mounted 
attachment.

Содержание 97-14 HS





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды