Sabo 102-13G, Инструкция по эксплуатации

Страница: 105 / 323

ENG 50 TROUBLESHOOTING
PROBLEM LIKELY CAUSE SOLUTION
14. Unusual vibrations
while working
15. With the engine
running, the machine
does not move when
the drive pedal is
pressed.
( for
hydrostatic drive
models)
➤
– forward speed too high compared to
height of grass (
☛
5.4.5)
– collector channel is blocked
– cutting deck full of grass
– the blades are imbalanced
– blades loose
– fixing bolts loose
– disengage lever in positon «B»
(
☛
4.33)
– reduce forward speed and/or raise the
cutting deck
– wait for the grass to dry
– remove the grass-catcher and empty
the collector channel (
☛
5.4.7)
– clean the cutting deck(
☛
5.4.10)
– balance or replace the damaged bla-
des (
☛
6.3.1)
– check that the blades are firmly fitted
(
☛
6.3.1) (remember the left-hand
thread of the right hand blade)
– check and tighten all the fixing bolts of
the engine and frame
– put into position «A»
If problems continue after having carried out these operations, contact your
Dealer.
Do not take on complicated repair work if you don't
have the necessary equipment and the technical knowledge.
The guarantee is automatically revoked and the manufacturer declines
all responsibility for any repairs which are badly done.
!
WARNING!