49
B2-GRQ-OpGuide-v9-031020.pmd
Limit
Limit
sets an absolute output gain level. Peak input signals rising above the
threshold value set with this parameter will be compressed so extremely as to
reflect no additional gain at the output stage. Note that the
Limit
threshold and
the compressor threshold (
Thresh
) can be set independently, allowing both a
mild degree of compression and brick wall peak limiting. All other parameters
besides
Thresh
and
Ratio
are common for both the compressor and limiter.
Attack
Attack
sets the speed with which the signal is compressed once the gain
exceeds the threshold.
Attack
is generally set to a very quick response and
can be varied from 1 to 99 msec.
Release
Release
sets the speed with which the output signal returns to unity gain when
the input signal falls below the threshold. It can be varied from 50 milliseconds
to 5 seconds.
The compressor window also displays metering of the input signal (both channels) and the compression
added to the signal (both channels). When compression is engaged, the meters will work in opposite
directions.
Compressor/limiter functions on the GRQ3102 and GRQ3102-S models can be adjusted individually
for channels A and B using Graphi-Q Remote Control software.
S
ECTION
N
INE
: S
UGGESTIONS
FOR
O
PTIMAL
U
SE
OF
THE
G
RAPHI
-Q2
