33
B2-GRQ-OpGuide-v9-031020.pmd
S
ECTION
E
IGHT
: U
SING
GRQ R
EMOTE
S
OFTWARE
8.4. RESET PARAMETERS
You may use the Sabine Remote Soft-
ware to reset all parameters, or a particu-
lar set of parameters. To access the
Reset Parameters, press F12 Function
Key, or select Reset Parameters from the
Options Menu at the top of the main
remote screen. The screen at right will
appear:
Use your mouse to click on the settings
you wish to reset, or the “ALL” choice if
you want to reset everything. For two
channel Graphi-Qs, you may reset set-
tings for individual channels. For single
channel Graphi-Qs, you may reset OUT-
PUT LEVEL and DIGITAL DELAY set-
tings for the two different outputs possible
with these units; all other parameter settings are common to both outputs and will be reset for both.
NOTE:
Compressor output settings are NOT reset when the compressor /limiter parameters are
reset. Output levels control the output gain of the Graphi-Q and must be reset separately.
NOTE:
If you want to compare your settings to the Graphi-Q default condition (all settings zero), the
best way to do this is to save your current setting to a Preset, then change between that Preset and
Preset #0 (default).
8.5. PRINTING GRAPHI-Q2 SETTINGS FOR DOCUMENTATION
All settings loaded into a Graphi-Q2’s memory may be printed out for ease of documentation, by simply
selecting PRINT from the FILE menu at the top of the Remote Control main screen. Print one set of
parameters for each GRQ2 in a linked chain. Printing can be done in Remote Control or Demo modes.
In addition to printing a record of parameter settings for an individual Graphi-Q2, you may elect to print
a record of how controls are linked for a multiple-unit Graphi-Q2 system. Simply select “PRINT” from
within the link table.
If you are out in the field and not attached to a printer, you can use the Off-Line Edit/Demo mode to print
your parameter and link-table files when you get back to the office. Graphi-Q parameter files can be sent
via e-mail as well.
8.6. STORING AND RECALLING GRQ2 PRESETS
8.6.1. Memory Storage and Recall Options
You may store and recall all settings of the Graphi-Q2, either within the Graphi-Q2 memory itself, or as
an external file.
8.6.1.1. Storage within the Graphi-Q2 memory
There are two methods of storing memories inside the Graphi-Q2 itself:
1.
Using “Snapshot” memory storage. You may save and recall (load) up to three Snapshots of Graphi-
Q settings. Select Snapshot 1, 2, or 3 from the Options Menu, or use the keyboard shortcuts Shift/
F1, Shift/F2, and Shift/F3. To recall Snapshots, select from the Options Menu, or use keyboard
shortcuts Ctrl/F1, Ctrl/F2, and Ctrl/F3.
2.
Accessing the Stored Presets screen. This will allow up to 20 additional user-specified memory
configurations to be stored. To open this screen, press F6 on your keyboard, or select Stored
Presets from the Options Menu. The Stored Presets window will open (See top of page 33).
Preset 0 will always be the system default settings, effectively a blank template with all parameters set
to “off” or zero. This configuration will permit remote control of the Graphi-Q from any computer meeting
the minimum requirements (see
Section
Seven
) with the Graphi-Q2 Remote Control for Windows
Software installed.
Preset 1 (FRONT PANEL) will apply only to Graphi-Q models GRQ3121 and GRQ3122, and not to the
“S” (blank front panel slave) models. In this setting, the front panel controls of the Graphi-Q2 will provide
the only means of controlling settings; any software-initiated controls will be ignored. However, any
