SABINE GRAPHI-Q2 Скачать руководство пользователя

Страница: 1 / 56

B1-GRQ-2-OpGuide-v1-050125.pmd

GRQ3121 (1U, single channel, one input, two outputs)

GRQ3122 (2U, dual channel, one input & output per channel)

GRQ3121-S (1U, blank front panel slave, single channel, one input, two outputs)

GRQ3122-S (1U, blank front panel slave, dual channel, one input & output per channel)

GRQ2 Remote for Windows

Software included with every unit; runs up to 8 Graphi-Q2s per COM port

(maximum of 2 COM ports)

•

All front panel controls are analog-style; signal path is digital

•

“Tweek-n-Peek” feature: Front panel adjustments of all parameters are shown in LED display screen

•

24-bit A/D and D/A conversion, 32-bit processing

•

20 to 20 KHz Frequency Response

•

+18 dBV Maximum Signal Input & Output

•

Floating Point SHARC Processor

•

>110 dB dynamic range

Each channel provides (now with fully independent processing on 1x2 units):

•

31-band graphic EQ, with ± 6 or 12 dB range (selectable)

•

Crossover: Bessel, Butterworth, and Linkwitz Reily filters; slopes to 48 dB/octave (Software only)

•

High Cut Filter (3KHz to 20KHz) and Low Cut Filter (20 Hz to 1KHz)

•

FBX Feedback Exterminator: up to 12 Filters, with Setup Mode (Auto Setup Mode via remote control)

•

Parametric Filters: up to 12 filters, numeric or graphic control (Software only)

•

Compressor/Limiter, with controls for ratio, threshold, and gain (attack, release, and knee adjustable
with remote)

•

Digital Delay, with up to 1 second delay, adjustable in 20 microsecond increments

•

Bypass: dedicated switches for FBX, EQ, and Delay with built in LED indicators

•

LED Segmented Indicators: FBX Filters, Level, Gain Reduction

•

LED Point Indicators: FBX Setup, Remote, EQ Range

•

LED Character Display: Delay setting, EQ fader boost/cut, High Cut Filter setting Low Cut Filter setting,
Compressor Ratio, Threshold, Gain, and Staus Messages.

Back Panel:

•

XLR & 1/4" TRS inputs & outputs

•

RS-232 Serial input & output (additional serial input on the slave front panels)

•

Remote switching (8-position contact closure switch; allows switch selection of all 20 stored Graphi-
Q2 presets)

Graphi-Q2 Remote Software Features:

All front panel controls, plus more, including:

•

FBX filter depth & width adjustments; switchable to parametric filters (depth, width & frequency
adjustments)

•

Graphic EQ filter width adjustments

•

Password protection

•

View & edit frequency response curves

•

20 user-defined stored presets

•

Control and link up to 8 Graphi-Q2s (16 channels of audio) per COM port (1 or 2 ports can be used)

•

Future-proof FREE Flash RAM upgrade capability: upgrade your firmware and software from the Sabine
website (www.Sabine.com)!

Summary of Features

UMMARY

EATURES

Operating Guide Version 1: for Sabine Graphi-Q2s with:

•

GRQ2 Firmware Version 2.20

•

GRQ2 Remote Software Version 5.0

Содержание GRAPHI-Q2

























































Результаты поиска

Содержание GRAPHI-Q2

Отзывы:

Похожие инструкции для GRAPHI-Q2

Бренды по названию

Популярные бренды

SABINE GRAPHI-Q2, Руководство по эксплуатации

Результаты поиска

Содержание GRAPHI-Q2

Отзывы:

Похожие инструкции для GRAPHI-Q2

Бренды по названию

Популярные бренды