Assembly and operating manual
rtv.sabaj.pl/en/home/
2. Place the lift in the previously prepared furniture and fasten it with screws (page 16), three
screws for the floor and two screws for the rear wall (fig. 2).
NOTE:
Remember to check if the screws are tailored to the depth of the furniture (too long screws
can damage the furniture). Use the extended adjusting grip if needed.
3. Mount the controller on the brackets (fig. 3), and then connect the controller to the lift.
Driver can be placed anywhere, but remember to keep the right distance for the cable - it
should not snag the the lift and TV elements.
NOTE:
Remember that the controller should hang freely. Do not tighten the screws too tight
to avoid breaking the control box.
fig. 2
fig. 3
