Problem
Possible Causes
What to Do
Unsatis-
factory
washing
result
Cloudiness on
glassware
Combination of soft
water and too much
detergent.
Use less detergent if you have soft water
and select a shortest cycle to wash the
glassware and to get them clean.
Black or gray
marks on
dishes
Aluminum utensils
have rubbed against
dishes.
Use a mild abrasive cleaner to eliminate
those marks.
Detergent left
in dispenser
cups
Dishes block
detergent cups.
Re-loading the dishes properly.
Unsatis-
factory
drying
result
The dishes are
not drying
Improper loading
Load the dishwasher as suggested in the
directions.
Too little rinse-aid
Increase the amount of rinse-aid/refill
the rinse-aid dispenser.
Dishes are removed
too soon
Do not empty your dishwasher
immediately after washing. Open the
door slightly so that the steam can
escape.
Begin unloading the dishwasher only
once the dishes are barely warm to the
touch.
Empty the low basket first. This prevents
water form dropping off dishes in the
upper basket.
Wrong program has
been selected
In short program the washing
temperature is lower. This also lowers
cleaning performance. Choose a program
with a long washing time.
Use of cutlery with a
low-quality coating
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in the
dishwasher.
110
GB
