Electrical Requirements
Please look at the rating label to know the rating voltage and
connect the dishwasher to the appropriate power supply. Use
the required fuse 10 amp, time delay fuse or circuit breaker
recommended and provide separate circuit servingonly this
appliance.
Electrical Connection
Ensure the voltage and frequency of the power being corresponds
to those on the rating plate. Only insert the plug into an electrical
socket which is earthed properly. If the electrical socket to which
the appliance must be connected is not appropriate for the plug,
replace the socket, rather than using a adaptors or the like as they
could cause overheating and burns.
Cold Water Connection
Connect the cold water supply hose to a
threaded 3/4(inch) connector and make sure
that it is fastened tightly in place.
If the water pipes are new or have not been
used for an extended period of time, let the
water run to make sure that the water is clear.
Water Connection
Insure proper ground exists before use
WARNING!
Please close the hydrant after using.
This precaution is needed to avoid the risk of the water inlet to be
blocked and damage the appliance.
104
GB
