
7
5. Front panel
POWER KEY:
To switch the receiver power on/stand by.
MENU KEY
:
To enter the Main Menu.
OK KEY:
To see TV/Radio channel list, or to confirm in the menu.
V-/V+ KEY:
To adjust volume level, or to move cursor left or right in the menu.
CH-/CH+ KEY:
To change channels, or to move cursor up or down in the menu.
POWER Indicator:
Lit whilst the receiver is powered on and at standby mode.
Signal Indicator:
When received signal is strong, the signal indicator is lit.
Card Slot:
One CA Interface for Conax.
USB
A:
USB 2.0 Host, connect to USB hard disk, or flash disk,and 3G dongles.
Display:
(LED type) Indicates operating status of receiver.
6. Rear Panel
Please refer to the diagram above for all possible connections of your receiver
Do not connect the unit to the mains socket until all other connections have been made and checked.
LNB IN
13/18V 400mA MAX:
This port is to connect the coaxial cable from LNB of your Dish.
S/PDIF:
Digital Audio interface, connect to AV amplifier S/PDIF input terminal.
USB B:
USB 2.0 Host, connect to USB hard disk, or flash disk,and 3G dongles.
VIDEO:
This SCART connector is used to connect any external video.
HDMI:
Audio and Video output socket for TV set with HDMI Input Jack only.
RS 232
SERIAL PORT: This is used to connect your receiver to a computer through a serial cable.
Ethernet:
Network port, you can get a new software updates from this port.
POWER ON/OFF SWITCH:
To switch ON/OFF the receiver power supply.
DC 12V:
To connect external DC power adapter.
7. Connecting Your System
There are two ways to connect the receiver to your existing TV system. We recommend using one of the following
cases for the best result:
1.
If you have a high definition television set, you should use a HDMI cable for best result, Plug one end of the
cable into the HDMI socket on the receiver, and the other end into the matching socket on your television. In
this case, you do not have to make audio connections because the HDMI connector can output stereo audio or
Dolby Digital audio.
2.
Connect one end of SCART cable to the SCART jack on the back of the receiver and the other end to a SCART
jack on your TV.