23
viii. Press [MENU] key to exit the current menu.
11.6 Parental Control
1
You can set a password for anyone who wishes to
operate in the
“Installation” menu. And you can
also set the password for the lock channels. (How
to set the lock channel please refer to LOCK) Here
will show you how to setting and how to revising
the password.
2
In
“Parental Lock” function, press [OK] key, there
will pop an dialogue for you to input the password.
When you input the correct password, you will see
a screen like below:
3
Menu Lock determining that when user wish to
enter main menu, whether have to input Password
or not. If the setting of
“Menu Lock” is “On” which
means user have to key in password, set
“Off”
means unlock.
4
Channel Lock determining that when user wish to
play the lock channels, whether have to input the
password or not. If the setting is
“On”, play the
channels with lock mark will show up a dialogue on
the screen and ask for the password. If the setting
of
“Channel Lock ”is “Off”, the Lock function will
invalid.
5
New Password is used for revising password; you
can input the new password in this item by using
number keys directly. After you filled in 4 digital
numbers, the highlight will auto skip to Confirm
Password and ask you to input the new password
again. If the password is correct, the screen will
show up a message of
“Saving Data, Please
Wait
…”. After finish saving and draw back to
“System Setup” menu, the revising is complete.
6
Press [MENU] key to draw back from the
“Parental
Lock
” menu.
11.7 Miscellaneous Settings
When you enter to
“Miscellaneous Settings” menu, you
will see a screen like below:
1
Subtitle Auto: You can press [Left/Right] key to
select
“On” or “Off”. If the current channel has
subtitle information, it will be showed up
automatically while this function is
“ON”, if this
function is
“OFF”, you need turn on the subtitle
manually by press [SUBTITLE] key.
2
Auto Power Down: You can press[Left/Right] key
to select the time or
“Off”, if you select time,
duration this time if no any operation on receiver, it
will go to standby mode.
3
Deep Standby:
if set to “On”, Press power key
receiver will be in real standby status, the
consumption will less than 0.5 Watt.
if it’s set to
“Off” ,Press power key, receiver will be in fake
standby status.
4
OSD Timeout: When you switch channels in full
screen, there will show up some information about
current channel on the lower of the screen. And
regarding to the duration of these information
show up on the screen, you can press [OK] and
[up/ down] key to set the time. The range of the
duration is “1 second ~
10seconds”.
5
OSD Position: control display position of the info
bar in full screen mode. You can choose
“bottom”
or
“top”.