SAB GOBLIN RAW 500, Руководство пользователя

Страница: 37 / 44

Page 36
CHECK LIST
9
Check Belt tension.
The tension has to be tight.
10
Check if the FBL-RX connectors are OK
(hot glue is recommended).
11 Check the M2.5 bell crank:
Belt crank movement must be smooth
and the screw locked.
( It is suggested use a bit of Green Loctite.)
Be sure the following parts are properly
lubricated
*Main shaft/swashplate
*Tail slider/tail shaft
*Carbon rod/carbon rod support
*All thrust bearings
*All plastic balls connections
12
Check tail pulley set screw:
Ensure it is tight.
( It is suggested use a bit of Green Loctite.)
Check all power connectors
(Good mechanical connection).
4
7
Check the Main Linkages & Servo Linkages
Check for vertical play of the main shaft.
6 5
Check the 2 M3 Tail group screws.
Ensure they are tight.
1 2 3
Check main hub screws M3
Ensure they are tight.
Tighten the main blades before flight. Check the dampening on the main and
tail rotor to be the same as always.
8