SAB GOBLIN RAW 500, Руководство пользователя

Страница: 16 / 44

Approx 42.5-43.5mm
38mm
47mm
Approx 55.5mm
Approx 39.5-42.5mm
X
Box 2, Bag for page 15
Thread Rod
HEX M2x22mm
(H1883-S)
Plastic ball link
(H0403-S)
Plastic ball link
(H0403-S)
If X = 14 - 15mm
: Use Hex Linkage [H1883]
Plastic ball link
(H0403-S)
Plastic ball link
(H0403-S)
Initial length for the rods from the servos to the swash plate.
LINKAGE ROB B 1
ASSEMBLY
LINKAGE ROB B 2
ASSEMBLY
Thread Rod
HEX M2x32mm
(H1884-S)
Initial length for the rods from the servos to the swash plate.
Linkage rod assembly Follow Servo Dimension on page 8
Linkage rod B2 assembly ... x1
11-12mm: Cut Ball Link
12-13mm: Cut Ball Link
13-15mm: Cut Ball Link
Check the "
X
" in your Servos
LINKAGE ROD B1 ASSEMBLY ... x2
If X = 11 - 14mm
: Use Thread Rod [H0561]
Plastic ball link
(H0403-S)
Plastic ball link
(H0403-S) Thread Rod
M2x22mm
(H0561-S)
Initial length for the rods from the servos to the swash plate.
NOTE:
Due to a lack of standard with mini servos, if the distance
between the top of the servo and the center of the servo
spline is your particular servo brand is less than 14mm, you
should cut between 0.5mm and 1mm off each ball link
[H0403-S] (front servos only) in order for the swash to be
leveled correctly.
Very carefully cut the ball link with an exacto knife.
Page 15
ASSEMBLY OF THE MODULES